PRODUCT
QUICK LINKS

Product  >  FM CODEL GCEM1000 - Online CO Gas Analyser >  FM CODEL GCEM1000 - Online CO Gas Analyser

Enquiry


FM CODEL GCEM1000 - Online CO Gas Analyser
  • IR based , Insitu online CO gas analyser for combustion control....
  • Local / Remote control unit.
  • Data in ppm, mg/m3.
  • Insitu, SS316 rugged & reliable probe.
  • Works on gas diffusion technique – no choking of filters.
  • Fast response.
  • No sampling / conditioning of gases.
  • Works perfectly even in very dusty application – ideal product to measure CO gas at Air preheater inlet location i.e before ESP.
  • Built in online auto zero calibration by  plant instrument air.
  • Online Manual span verification check facility.
  • Single port entry , no misalignment problem , reduced installation requirement.
  • Field mounted  – No AC panel/room is required, low power consumption.
  • Factory pre-commissioned - less work on site.
  • Minimal on-site commissioning routines.
  • Negligible maintenance.
  • No upper limit on duct size.
  • Suitable for flue gas temperature above dew point to  400 deg.c.

Product Specifications Product Benefits Applications Technical Documentation
  • Range : 0 - 3000ppm, mg/m3 (Higher on request).
  • Accuracy :+/_2% of measured value .
  • Resolution: 1ppm, mg/m3 & mg/Nm3.
  • Averaging : 10 seconds to 30 days.
  • Path length : 1m & above duct size.
  • Flue gas temperature : above dew point to 400 deg.c.
  • Power supply : 88-264VAC, 50/60Hz , 120VA.
  • Purge air : 5lpm@4bar pressure.
  • Probe insertion length : 1m, 1.8m & 2.3m.