This website uses cookies. By continuing to browse, you are agreeing to our use of cookies as explained in our, Cookies Policy.

Home /

The Complete Process Instrumentation Ideas



Oxygen Mesaurement In Waste Water

BOD and COD measurement for WTP : Week 8/17/2011

We have always been a knowledge driven company and believe in sharing our experience and knowledge with our customers. We do this through various publications including our recent studies on energy benchmarking. We successfully launched the Encon tips program last year.

Using BOD/COD for Aeration Control : Week 9/5/2011

In last fortnight, we mentioned that Biological Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) are two important parameters in any Waste Water Treatment process.

Energy Saving in Waste Water Treatment : Week 9/15/2011

In last fortnight, we wrote about available methods for measurement of process variables & their usefulness to the user. We also discussed implementation of various aeration control techniques.

Intelligent Effluent Treatment Control : Week10/1/2011

In this fortnight we are coming up with a concluding article on the topic of 'Saving Electrical Energy in Waste Water Treatment'.

Anti Scaling Solutions

Ecofriendly Descaling : Week 11/1/2011

In last fortnight, we spoke about 'Scaling' in pipelines & on heat exchanger surfaces and possible solutions to address this issue. We spoke about a new technology which is eco-friendly.

De-scaling wihtout softners : Week 11/15/2011

The 'De-scaling' technology for pipelines & heat exchangers has manifold benefits. In our last article, we said, we will elaborate this technology with more pictures and also tell you about some important aspects to be considered while considering this technology

Energy Saving by De-scaling : Week 12/1/2011

In the last article, we saw what does the Scale Blaster technology do to salts & whether it can save Energy bills. Now, let's see whether it can indeed pay back to the user. .

Applications of De-scaling : Week 12/15/2011

In the last article, we saw what are the possible benefits to the user by using the Scale removal technology. We also saw various headings under which one can work out a payback.

Savings With Compressed Air

Free Air Delivery(FAD) Metering : Week 1/15/2012

In the last article, we discussed about some basics of FAD (the Free Air Delivery) of a compressor. We also observed that Compressed Air - in any plant, can be a very costly affair if not controlled properly.

Importance of Compressed Air Efficiency Measurement : Week 2/1/2012

In the last article, we discussed about major problem areas that the plants face in terms of compressed air. We are, by now, clear that Compressed Air, in any plant,

New Technology for Free Air Delivery(FAD) Metering : Week 2/15/2012

In the last article, we discussed about quantifying the cost of compressed air leakage. We also saw the reasons why one should meter the compressed air,

Free Air Delivery(FAD) Metering for Scaling Control Application : Week 3/1/2012

In the last article, we discussed about how can we measure the accurate FAD at the discharge point of the compressor with on-line pressure & temperature compensation. In this article

Level Measurement

Why use level radar ? : Week 4/1/2012

In the last article, we discussed about importance of Level measurement and how the Radar type measurements are beneficial to the user. In this article, lets see some applications of Radar type measurements

Quick Biological Oxygen Demand Measurement

Methods of Biological Oxygen Demand (BOD) Measurement : Week 5/10/2012

In the last article, we discussed about basics of BOD, i.e. the Biological Oxygen Demand. In this article, let us discuss about the available methods of measuring BOD & their limitations

Innovation in Biological Oxygen Demand (BOD) Measurement : Week 5/22/2012

In the last article, we discussed about available methods of measuring BOD & their limitations. In this article let's discuss if there is some better way of measurement.

Flue Gas Emission Monitoring

Monitoring Carbon Monoxide (CO) accurately : Week 7/1/2012

In our last article, we discussed about Electro Static Preciptator (ESP) & why there is danger of explosion at ESP. We also discussed about the importance of CO & need to measure it accurately.

In-situ technology for Continous Emission Montioring : Week 7/18/2012

In our last article, we discussed about care to be taken at ESP & how to avoid formation of CO. We also discussed about monitoring of CO.

Managing Your Steam

Methods of De-superheating : Week 8/21/2012

In our last set of article, we discussed about what is De-superheating, why it is required & how it is done. In this article, let's see various methods of desuperheating.

About Variable Nozzle De-superheating : Week 9/7/2012

In our last set of article, we discussed about some methods of De-superheating and their significance. In this article, let us discuss about Variable Nozzle Desuperheater & how desuperheating can be done effectively

Achieving Efficient De-superheating : Week 10/1/2012

In our last set of article, we discussed about Variable Nozzle Desuperheater (VND) & how desuperheating can be done effectively. In this article, we will discuss about advantages of VND concept & it's applications.

Combined Pressure Reduction and Desuperheating (PRDS) : Week 10/23/2012

In our last set of article, we discussed about advantages of Variable Nozzle Desuperheater (VND) concept & it's applications.

Advantages of Combined Pressure Reduction and Desuperheating (PRDS) : Week 11/28/2012

In our last set of article, we discussed about combined pressure reducing and desuperheating. In this article, we will discuss about some useful

Flue Gas Flow Monitoring

Flue Gas Flow Measurement Techniques : Week 2/1/2013

In our last article, we discussed about Flue Gas Flow Monitoring in any variety of Boilers. In this article, we will discuss about available techniques of measurement & also about new upcoming techniques .

In Situ Non Contact Type Flue Gas Flow Measurement : Week 2/15/2013

In our last article, we discussed about available techniques of measurement & also about new upcoming techniques. In this article, we will discuss about new techniques of measurement.

Making Money From Air

Is Air Audit important ? : Week 4/1/2013

In our last article, we discussed about some interesting facts about compressed air. We also talked about how to handle the compressed air in the industrial environment

Air System

Saving Electricity by Intelligent Control of Compressed Air System : Week 6/18/2013

In our last article, we discussed about 'Life beyond Air-Audit'. This article showcased how the findings of Air Audits can be used in practice to improve the operations,

Mastering Air Control

Benefits of Master Air Control (MAC) : Week 7/30/2013

In our last article, we discussed about an interesting idea about better compressed air management that can improve the operations, reduce the energy consumption

Why Measure O2 & N2

Why measure nitrogen ? : Week 10/25/2013

In our last article, we discussed about Oxygen measurement in different processes. In this article, we will discuss about oxygen measurement in relation with Nitrogen.

Stop the Flow

Swing Check Valve - Why & Where ? : Week 1/13/2014

In our last article, we discussed about some issues related to Textile industry. The article was about how important it is to maintain right pH value in the process to ensure the right dyeing quality.

Blanketing and Inerting

Dissolved Oxygen (O2) Measurement in Blanketing and Inerting Operations : Week 3/28/2014

In our last article, we discussed about an application that is common in variety of Industries - Blanketing and Inerting.

Milk Products

Measuring Fats and Proteins directly in dairy industry : Week 6/6/2014

In our last article, we discussed about level measurement in difficult areas in the minerals & mining industry. In this article, we will discuss about a different industry

Maintaining condition of rotating machines in cement industry

Keeping an eye on rotating machines : Week 10/17/2014

In our last article, we discussed about why precise temperature control of steam supplied to a turbine for Power Generation is important & how it can be achieved.

Is vibration monitoring essential? Week 9/22/2014

In our last article, we discussed about why it is important to keep an eye on condition of rotating machines in a Cement Industry & the main objectives of monitoring vibration.

Industrial Pollution - Smart way to monitor

Industrial Pollution - Smart way to monitor : 2/26/2015

In our last article, we discussed about vibration analysis software, it's essential features and benefits one can derive from it. In this article, we will be talking about a different idea

Industrial Pollution - Measuring CO, SO2, NOx, HCL, CH4, CO2, H2O

Industrial Pollution - Measuring CO, SO2, NOx, HCL, CH4, CO2, H2O 4/1/2015

In our last article, we discussed about on-line monitoring of Industrial Pollution - on a national level… In this article we will be discussing the smart ways of monitoring pollution due to gas emissions.

Measuring COD / BOD in a multiparameter analyzer

Measuring COD / BOD in a multiparameter analyzer : 6/1/2015

In our last article, we discussed about smart ways of monitoring water pollution due to industrial effluents.

Ensuring 24x7 drinking water to all citizens

Ensuring 24x7 drinking water to all citizens : 9/15/2015

24x7 Drinking Water for cities ? Why are municipalities working hard on this matter?