This website uses cookies. By continuing to browse, you are agreeing to our use of cookies as explained in our, Cookies Policy.

Home / Solutions / Flow & Level / DW 184
DW 184
The DW 184 insertion-type flow controller checks flow velocity. It is suitable for horizontal and vertical pipes with nominal diameters of 250 mm / 10" or bigger - there is no maximum pipe diameter.

It is installed on a DN 150 PN 16/40 or 6" ASME150/300 lbs mounting flange. The measuring tube and connection is made of either 1020 (XC 18) carbon steel or 316 L (1.4404) stainless steel.

A mounting flange made of carbon steel can also have 316 L stainless steel cladding. One type of indicator is available for this variant:

• a linear scale with alarm positions at the top and bottom of the indicator.

Application:

Flow detection, Cooling systems, Pump protection, Lubrication control, Cavitation alarm.
  • Permanent readings using a powerful magnet
  • No need for a power supply to indicate flow
  • Unique Ex d design (without dial for local readings)
  • High temperature version (without local indication) can operate up to 300°C (570°F)
  • Available for process pressures up to 120 bar (1740 psig)
  • No pipe diameter limit: Insertion-type version is suitable for pipes > 250mm
  • Any tube length is available for easy replacement of existing units
  • Large choice of process connections and wetted parts material
  • With optional stainless steel housing
  • Works with any clean liquid in any position
  • High reliability and repeatability
  • Alarm position: set by factory free of charge during test rig flow calibration
  • Each instrument is individually calibrated and tested
  • Switch value can be dry-tested!
  • Optional 3-wire device (without local indication) with 4-20 mA current output (not CE certified!)
  • Power supply device and digital indication possible via C95 Ci or similar
This is a product of KROHNE Marshall.