Insitu Multi Gas Analyser - FM CODEL GCEM4000


Flue gas analyser, Multi Gas Analyser, Stack gas analyser, SO2,NOx gas analyser
  • Insitu IR based Online stack gas emission monitor.
  • Capable of measuring upto seven gases like CO,CO2,NO,NO2,SO2,HCL, H2O.
  • Built in CO2, H2O , temperature & pressure measurement for online normalisation i.e  for data in mg/Nm3.
  • Data in ppm, mg/m3, mg/Nm3 .
  • Insitu, SS316 rugged & reliable probe.
  • Works on gas diffusion technique – no choking of filters.
  • Fast response.
  • No sampling / conditioning of gases.
  • Works perfectly even in very dusty application.
  • Bulk measurement , can be mounted anywhere after the ESP.
  • Built in online auto zero calibration by  plant instrument air.
  • Online Manual/automatic  span verification check facility.
  • Single port entry , no misalignment problem , reduced installation requirement.
  • Factory pre-commissioned - less work on site.
  • Minimal on-site commissioning routines.
  • Negligible maintenance.
  • No upper limit on duct size.
  • Suitable for flue gas temperature above dew point to 400 deg.c.
  • MCERT certified.
  • Field mounted  – No AC panel/room is required, low power consumption.
Product Specifications Product Benefits Applications Technical Documentation
  • Range : CO/NOx/CH4/HCL : 0 - 3000 (ppm,mg/m3&mg/Nm3) , SO2 : 0-25,000 (ppm, mg/m3 & mg/Nm3), CO2/H2O:0-25%  (Higher on request).
  • Accuracy :+/_2% of measured value. 
  • Resolution: 1ppm, mg/m3 & mg/Nm3.
  • Averaging : 10 seconds to 1Hr.
  • Path length : 1m & above duct size.
  • Flue gas temperature : above dew point to 400 deg.c.
  • Power supply : 88-264VAC, 50/60Hz , 150VA.
  • Purge air : 5lpm@4bar pressure.
  • Probe insertion length : 1m, 1.8m & 2.3m.
close

Recent Announcements